C0230
Brake Pedal Position Sensor Circuit
The brake pedal position sensor reports an implausible signal. Required for brake-by-wire and stability control.
The brake pedal position sensor reports an implausible signal. Required for brake-by-wire and stability control.
Common causes
- high
Sensor failed
One of the most commonly reported causes for this code — check this first.
Typical part cost: $90-390
- medium
Pedal linkage loose, biasing sensor
A plausible cause — test and verify before replacing parts.
Typical part cost: $90-390
See all causes + fix costs
Create a free Wrenchify account to unlock the rest for C0230.
Unlock causesFree forever · No credit card
First things to check
- 1Confirm the code with a scan tool and check for additional related codes.
- 2Inspect the relevant sensors, wiring, and connectors for damage or corrosion.
Get the full step-by-step diagnosis
Create a free Wrenchify account to unlock the rest for C0230.
Unlock diagnosisFree forever · No credit card
Related codes
See related trouble codes
Create a free Wrenchify account to unlock the rest for C0230.
Unlock related codesFree forever · No credit card
Frequently asked questions
What does C0230 mean?
C0230 means "Brake Pedal Position Sensor Circuit". It is a generic OBD-II code that points to a fault in the chassis.
What are the most common causes of C0230?
sensor failed; pedal linkage loose, biasing sensor — these are the most commonly reported causes. Verify with a proper diagnosis before replacing parts, or use the Wrenchify app for a vehicle-specific diagnosis.
Can I keep driving with this code?
The vehicle is usually drivable for short distances, but the problem can worsen or affect emissions. Diagnose and repair as soon as practical. Use the Wrenchify app for a full diagnosis specific to your vehicle.
Get the full C0230 diagnosis for your vehicle
Year, make, model + step-by-step repair help — free plan included.