C0563

Calibration Mismatch

Moderate severity

The chassis control module has detected that stored calibration values do not match the current vehicle configuration — for example after a wheel/tire size change or replacement of an inertial sensor cluster. Stability functions are degraded.

Common causes

Wheel size or sensor cluster mismatch
One of the most commonly reported causes for this code — check this first.
high
Typical part cost: $90-550
Stored calibration data corrupted
Less common, but worth ruling out after the more likely causes.
low
Typical part cost: $90-550
See all causes + fix costs
Create a free Wrenchify account to unlock the rest for C0563.
Unlock causes
Free forever · No credit card

First things to check

1Confirm the code with a scan tool and check for additional related codes.
2Inspect the relevant sensors, wiring, and connectors for damage or corrosion.

Get the full step-by-step diagnosis

Create a free Wrenchify account to unlock the rest for C0563.

Unlock diagnosis

Free forever · No credit card

Related codes

See related trouble codes

Create a free Wrenchify account to unlock the rest for C0563.

Unlock related codes

Free forever · No credit card

Frequently asked questions

What does C0563 mean?

C0563 means "Calibration Mismatch". It is a generic OBD-II code that points to a fault in the chassis.

What are the most common causes of C0563?

wheel size or sensor cluster mismatch; stored calibration data corrupted — these are the most commonly reported causes. Verify with a proper diagnosis before replacing parts, or use the Wrenchify app for a vehicle-specific diagnosis.

Can I keep driving with this code?

The vehicle is usually drivable for short distances, but the problem can worsen or affect emissions. Diagnose and repair as soon as practical. Use the Wrenchify app for a full diagnosis specific to your vehicle.

Get the full C0563 diagnosis for your vehicle

Year, make, model + step-by-step repair help — free plan included.

Diagnose C0563