All codes/P02CC

P02CC

Cylinder 1 Fuel Injector A Offset Learning At Min Limit

Moderate severity

The PCM applies a per-cylinder injector offset (Mengenausgleich) to compensate for production-tolerance differences in injector flow rate. On cylinder 1 the learned correction has reached its minimum value — the injector is delivering significantly more fuel than the calibrated reference and the controller cannot trim it any further.

The PCM applies a per-cylinder injector offset (Mengenausgleich) to compensate for production-tolerance differences in injector flow rate. On cylinder 1 the learned correction has reached its minimum value — the injector is delivering significantly more fuel than the calibrated reference and the controller cannot trim it any further.

Common causes

  • Injector over-delivering — worn nozzle or stuck-open seat

    One of the most commonly reported causes for this code — check this first.

    high

    Typical part cost: $220-1650

  • Calibration code not programmed after replacement

    A plausible cause — test and verify before replacing parts.

    medium

    Typical part cost: $220-1650

  • See all causes + fix costs

    Create a free Wrenchify account to unlock the rest for P02CC.

    Unlock causes

    Free forever · No credit card

First things to check

  1. 1Confirm the code with a scan tool and check for additional related codes.
  2. 2Inspect the relevant sensors, wiring, and connectors for damage or corrosion.

Get the full step-by-step diagnosis

Create a free Wrenchify account to unlock the rest for P02CC.

Unlock diagnosis

Free forever · No credit card

Related codes

See related trouble codes

Create a free Wrenchify account to unlock the rest for P02CC.

Unlock related codes

Free forever · No credit card

Frequently asked questions

What does P02CC mean?

P02CC means "Cylinder 1 Fuel Injector A Offset Learning At Min Limit". It is a generic OBD-II code that points to a fault in the fuel & air metering (injector circuit).

What are the most common causes of P02CC?

injector over-delivering — worn nozzle or stuck-open seat; calibration code not programmed after replacement — these are the most commonly reported causes. Verify with a proper diagnosis before replacing parts, or use the Wrenchify app for a vehicle-specific diagnosis.

Can I keep driving with this code?

The vehicle is usually drivable for short distances, but the problem can worsen or affect emissions. Diagnose and repair as soon as practical. Use the Wrenchify app for a full diagnosis specific to your vehicle.

Get the full P02CC diagnosis for your vehicle

Year, make, model + step-by-step repair help — free plan included.

Diagnose P02CC