P03FA

Ignition K Control Signal Circuit/Open

High severity

Ignition K Control Signal Circuit/Open: the circuit is open. This line drives an ignition coil group; a fault causes misfire on those cylinders.

Common causes

Open wire between PCM and coil
One of the most commonly reported causes for this code — check this first.
high
Typical part cost: $70-550
Pin pushed back out of connector body
Less common, but worth ruling out after the more likely causes.
low
Typical part cost: $70-550
See all causes + fix costs
Create a free Wrenchify account to unlock the rest for P03FA.
Unlock causes
Free forever · No credit card

First things to check

1Confirm the code with a scan tool and check for additional related codes.
2Inspect the relevant sensors, wiring, and connectors for damage or corrosion.

Get the full step-by-step diagnosis

Create a free Wrenchify account to unlock the rest for P03FA.

Unlock diagnosis

Free forever · No credit card

Related codes

See related trouble codes

Create a free Wrenchify account to unlock the rest for P03FA.

Unlock related codes

Free forever · No credit card

Frequently asked questions

What does P03FA mean?

P03FA means "Ignition K Control Signal Circuit/Open". It is a generic OBD-II code that points to a fault in the ignition system or misfire.

What are the most common causes of P03FA?

open wire between pcm and coil; pin pushed back out of connector body; cracked solder joint inside the module or sensor — these are the most commonly reported causes. Verify with a proper diagnosis before replacing parts, or use the Wrenchify app for a vehicle-specific diagnosis.

Can I keep driving with this code?

This code points to a problem that can cause damage or affect safety. Avoid driving and have the vehicle diagnosed promptly. Use the Wrenchify app for a full diagnosis specific to your vehicle.

Get the full P03FA diagnosis for your vehicle

Year, make, model + step-by-step repair help — free plan included.

Diagnose P03FA