P03FB

Ignition K Control Signal Circuit Low

High severity

Ignition K Control Signal Circuit Low: the signal voltage is below the expected range. This line drives an ignition coil group; a fault causes misfire on those cylinders.

Common causes

Short to ground
One of the most commonly reported causes for this code — check this first.
high
Typical part cost: $70-550
Connector pins corroded - high contact resistance
Less common, but worth ruling out after the more likely causes.
low
Typical part cost: $70-550
See all causes + fix costs
Create a free Wrenchify account to unlock the rest for P03FB.
Unlock causes
Free forever · No credit card

First things to check

1Confirm the code with a scan tool and check for additional related codes.
2Inspect the relevant sensors, wiring, and connectors for damage or corrosion.

Get the full step-by-step diagnosis

Create a free Wrenchify account to unlock the rest for P03FB.

Unlock diagnosis

Free forever · No credit card

Related codes

See related trouble codes

Create a free Wrenchify account to unlock the rest for P03FB.

Unlock related codes

Free forever · No credit card

Frequently asked questions

What does P03FB mean?

P03FB means "Ignition K Control Signal Circuit Low". It is a generic OBD-II code that points to a fault in the ignition system or misfire.

What are the most common causes of P03FB?

short to ground; connector pins corroded - high contact resistance; harness chafing through insulation — these are the most commonly reported causes. Verify with a proper diagnosis before replacing parts, or use the Wrenchify app for a vehicle-specific diagnosis.

Can I keep driving with this code?

This code points to a problem that can cause damage or affect safety. Avoid driving and have the vehicle diagnosed promptly. Use the Wrenchify app for a full diagnosis specific to your vehicle.

Get the full P03FB diagnosis for your vehicle

Year, make, model + step-by-step repair help — free plan included.

Diagnose P03FB