P06B7
Internal Control Module Knock Combustion Vibration Sensor Processor 2 Performance
An internal self-test in the control module reports a fault in its processing of the "knock sensor processing, channel 2" value. The module computes and cross-checks this value redundantly inside its own processor; when the results disagree, the code sets. It points to a hardware or software fault inside the module itself, not to a defect of the external sensor. Causes are an internal processor or memory fault, corrupted control-module software, or low or disturbed module supply voltage.
An internal self-test in the control module reports a fault in its processing of the "knock sensor processing, channel 2" value. The module computes and cross-checks this value redundantly inside its own processor; when the results disagree, the code sets. It points to a hardware or software fault inside the module itself, not to a defect of the external sensor. Causes are an internal processor or memory fault, corrupted control-module software, or low or disturbed module supply voltage.
Common causes
- high
Internal software anomaly
One of the most commonly reported causes for this code — check this first.
Typical part cost: $440-2750
- low
Gateway module routing CAN messages incorrectly
Less common, but worth ruling out after the more likely causes.
Typical part cost: $440-2750
See all causes + fix costs
Create a free Wrenchify account to unlock the rest for P06B7.
Unlock causesFree forever · No credit card
First things to check
- 1Confirm the code with a scan tool and check for additional related codes.
- 2Inspect the relevant sensors, wiring, and connectors for damage or corrosion.
Get the full step-by-step diagnosis
Create a free Wrenchify account to unlock the rest for P06B7.
Unlock diagnosisFree forever · No credit card
Related codes
See related trouble codes
Create a free Wrenchify account to unlock the rest for P06B7.
Unlock related codesFree forever · No credit card
Frequently asked questions
What does P06B7 mean?
P06B7 means "Internal Control Module Knock Combustion Vibration Sensor Processor 2 Performance". It is a generic OBD-II code that points to a fault in the computer & auxiliary output controls.
What are the most common causes of P06B7?
internal software anomaly; gateway module routing can messages incorrectly; can terminating resistor (120 ω) drifted out of spec — these are the most commonly reported causes. Verify with a proper diagnosis before replacing parts, or use the Wrenchify app for a vehicle-specific diagnosis.
Can I keep driving with this code?
The vehicle is usually drivable for short distances, but the problem can worsen or affect emissions. Diagnose and repair as soon as practical. Use the Wrenchify app for a full diagnosis specific to your vehicle.
Get the full P06B7 diagnosis for your vehicle
Year, make, model + step-by-step repair help — free plan included.