
Basic checks
Veepeak OBDCheck BLE
A Bluetooth LE adapter for reading standard engine codes and supported live data.
View on AmazonFuel Injector Group A Supply Voltage Circuit Low
The supply voltage measured at injector group A is below the calibrated threshold. Either the supply is shorted to ground or the source voltage has collapsed during cranking or load.
The supply voltage measured at injector group A is below the calibrated threshold. Either the supply is shorted to ground or the source voltage has collapsed during cranking or load.
One of the most commonly reported causes for this code — check this first.
Typical part cost: $90-440
A plausible cause — test and verify before replacing parts.
Typical part cost: $90-440
Create a free Wrenchify account to unlock the rest for P2147.
Unlock causesFree forever · No credit card
Create a free Wrenchify account to unlock the rest for P2147.
Unlock diagnosisFree forever · No credit card
Already have a compatible scanner? Use it. If not, a Bluetooth OBD2 adapter can help you confirm engine codes and check supported live sensor data before replacing parts.

Basic checks
A Bluetooth LE adapter for reading standard engine codes and supported live data.
View on Amazon
Regular diagnostics
A Bluetooth LE adapter with an automatic sleep feature for routine code and sensor checks.
View on Amazon
Another option
A Bluetooth LE adapter to consider when comparing supported vehicles and diagnostic apps.
View on AmazonIllustrations shown, not product photos. Check vehicle, phone and app compatibility before buying. These adapters do not guarantee access to ABS, airbags or manufacturer-specific systems. Clearing a code does not repair the fault and can reset emissions readiness monitors.
As an Amazon Associate, Wrenchify earns from qualifying purchases. This supports the app at no extra cost to you.
Create a free Wrenchify account to unlock the rest for P2147.
Unlock related codesFree forever · No credit card
P2147 means "Fuel Injector Group A Supply Voltage Circuit Low". It is a generic OBD-II code that points to a fault in the throttle actuator / cruise control / fuel trim.
supply wire shorted to ground; weak battery, low cranking voltage; connector pins corroded - high contact resistance — these are the most commonly reported causes. Verify with a proper diagnosis before replacing parts, or use the Wrenchify app for a vehicle-specific diagnosis.
This code can put the vehicle into limp or reduced-power mode. Avoid extended driving and have the vehicle diagnosed promptly. Use the Wrenchify app for a full diagnosis specific to your vehicle.
Year, make, model + step-by-step repair help — free plan included.