WRENCHIFY
Quick decodeBack to home
All codes/P271F

P271F

Electronic Gear Shift - Position Not Learned

High severity

The shift-by-wire controller did not complete the position learning routine for the gear selector. Without learned end stops the controller cannot map selector positions to gear requests.

The shift-by-wire controller did not complete the position learning routine for the gear selector. Without learned end stops the controller cannot map selector positions to gear requests.

Common causes

  • Learning routine aborted by other DTC or low voltage

    One of the most commonly reported causes for this code — check this first.

    high

    Typical part cost: $90-440

  • Shifter replaced without subsequent learn

    A plausible cause — test and verify before replacing parts.

    medium

    Typical part cost: $90-440

  • See all causes + fix costs

    Create a free Wrenchify account to unlock the rest for P271F.

    Unlock causes

    Free forever · No credit card

First things to check

  1. 1Confirm the code with a scan tool and check for additional related codes.
  2. 2Inspect the relevant sensors, wiring, and connectors for damage or corrosion.

Get the full step-by-step diagnosis

Create a free Wrenchify account to unlock the rest for P271F.

Unlock diagnosis

Free forever · No credit card

Tools you may need

Already have a compatible scanner? Use it. If not, a Bluetooth OBD2 adapter can help you confirm engine codes and check supported live sensor data before replacing parts.

Illustration of a Bluetooth OBD2 adapter, not a product photo

Basic checks

Veepeak OBDCheck BLE

A Bluetooth LE adapter for reading standard engine codes and supported live data.

View on Amazon
Illustration of a Bluetooth OBD2 adapter, not a product photo

Regular diagnostics

vgate iCar Pro BLE 4.0

A Bluetooth LE adapter with an automatic sleep feature for routine code and sensor checks.

View on Amazon
Illustration of a Bluetooth OBD2 adapter, not a product photo

Another option

OBDLink CX

A Bluetooth LE adapter to consider when comparing supported vehicles and diagnostic apps.

View on Amazon

Illustrations shown, not product photos. Check vehicle, phone and app compatibility before buying. These adapters do not guarantee access to ABS, airbags or manufacturer-specific systems. Clearing a code does not repair the fault and can reset emissions readiness monitors.

As an Amazon Associate, Wrenchify earns from qualifying purchases. This supports the app at no extra cost to you.

Related codes

See related trouble codes

Create a free Wrenchify account to unlock the rest for P271F.

Unlock related codes

Free forever · No credit card

Frequently asked questions

What does P271F mean?

P271F means "Electronic Gear Shift - Position Not Learned". It is a generic OBD-II code that points to a fault in the cylinder contribution / balance.

What are the most common causes of P271F?

learning routine aborted by other dtc or low voltage; shifter replaced without subsequent learn — these are the most commonly reported causes. Verify with a proper diagnosis before replacing parts, or use the Wrenchify app for a vehicle-specific diagnosis.

Can I keep driving with this code?

This code points to a problem that can cause damage or affect safety. Avoid driving and have the vehicle diagnosed promptly. Use the Wrenchify app for a full diagnosis specific to your vehicle.

Get the full P271F diagnosis for your vehicle

Year, make, model + step-by-step repair help — free plan included.

Diagnose P271F