P2812
Pressure Control Solenoid G Control Circuit/Open
The TCM detects an open circuit in the control wiring of pressure control solenoid G. No current flows when the solenoid is commanded.
The TCM detects an open circuit in the control wiring of pressure control solenoid G. No current flows when the solenoid is commanded.
Common causes
- high
Open in solenoid control wire
One of the most commonly reported causes for this code — check this first.
Typical part cost: $220-1980
- medium
Open solenoid coil
A plausible cause — test and verify before replacing parts.
Typical part cost: $220-1980
See all causes + fix costs
Create a free Wrenchify account to unlock the rest for P2812.
Unlock causesFree forever · No credit card
First things to check
- 1Confirm the code with a scan tool and check for additional related codes.
- 2Inspect the relevant sensors, wiring, and connectors for damage or corrosion.
Get the full step-by-step diagnosis
Create a free Wrenchify account to unlock the rest for P2812.
Unlock diagnosisFree forever · No credit card
Related codes
See related trouble codes
Create a free Wrenchify account to unlock the rest for P2812.
Unlock related codesFree forever · No credit card
Frequently asked questions
What does P2812 mean?
P2812 means "Pressure Control Solenoid G Control Circuit/Open". It is a generic OBD-II code that points to a fault in the auxiliary emission controls.
What are the most common causes of P2812?
open in solenoid control wire; open solenoid coil; pin pushed back out of connector body — these are the most commonly reported causes. Verify with a proper diagnosis before replacing parts, or use the Wrenchify app for a vehicle-specific diagnosis.
Can I keep driving with this code?
This code can put the vehicle into limp or reduced-power mode. Avoid extended driving and have the vehicle diagnosed promptly. Use the Wrenchify app for a full diagnosis specific to your vehicle.
Get the full P2812 diagnosis for your vehicle
Year, make, model + step-by-step repair help — free plan included.