P2DF3
Engine Disconnect Clutch Actuator Position Not Learned
The hybrid control module has not learned the end-stop calibration for the engine disconnect clutch actuator.
The hybrid control module has not learned the end-stop calibration for the engine disconnect clutch actuator.
Common causes
- high
Adaptation lost after battery disconnect
One of the most commonly reported causes for this code — check this first.
Typical part cost: $60-280
- medium
Actuator replaced without learn procedure
A plausible cause — test and verify before replacing parts.
Typical part cost: $60-280
See all causes + fix costs
Create a free Wrenchify account to unlock the rest for P2DF3.
Unlock causesFree forever · No credit card
First things to check
- 1Confirm the code with a scan tool and check for additional related codes.
- 2Inspect the relevant sensors, wiring, and connectors for damage or corrosion.
Get the full step-by-step diagnosis
Create a free Wrenchify account to unlock the rest for P2DF3.
Unlock diagnosisFree forever · No credit card
Related codes
See related trouble codes
Create a free Wrenchify account to unlock the rest for P2DF3.
Unlock related codesFree forever · No credit card
Frequently asked questions
What does P2DF3 mean?
P2DF3 means "Engine Disconnect Clutch Actuator Position Not Learned". It is a generic OBD-II code that points to a fault in the auxiliary emission controls.
What are the most common causes of P2DF3?
adaptation lost after battery disconnect; actuator replaced without learn procedure — these are the most commonly reported causes. Verify with a proper diagnosis before replacing parts, or use the Wrenchify app for a vehicle-specific diagnosis.
Can I keep driving with this code?
The vehicle is usually drivable for short distances, but the problem can worsen or affect emissions. Diagnose and repair as soon as practical. Use the Wrenchify app for a full diagnosis specific to your vehicle.
Get the full P2DF3 diagnosis for your vehicle
Year, make, model + step-by-step repair help — free plan included.