U0404
Invalid Data Received from Gear Shift Control Module
The Gear Shift Control Module is present on the data bus but the values it reports are implausible — out of range, frozen, or failing the checksum or rolling-count check. The receiving modules reject the data. Shift-by-wire gear selection may be wrong or blocked. Causes include a faulty sensor feeding the module, internal computation errors, a software or calibration mismatch after a repair, or bus interference corrupting the frames.
The Gear Shift Control Module is present on the data bus but the values it reports are implausible — out of range, frozen, or failing the checksum or rolling-count check. The receiving modules reject the data. Shift-by-wire gear selection may be wrong or blocked. Causes include a faulty sensor feeding the module, internal computation errors, a software or calibration mismatch after a repair, or bus interference corrupting the frames.
Common causes
- medium
Shift module internal fault
A plausible cause — test and verify before replacing parts.
Typical part cost: $90-1650
- medium
CAN corruption causing checksum errors
A plausible cause — test and verify before replacing parts.
Typical part cost: $90-1650
See all causes + fix costs
Create a free Wrenchify account to unlock the rest for U0404.
Unlock causesFree forever · No credit card
First things to check
- 1Confirm the code with a scan tool and check for additional related codes.
- 2Inspect the relevant sensors, wiring, and connectors for damage or corrosion.
Get the full step-by-step diagnosis
Create a free Wrenchify account to unlock the rest for U0404.
Unlock diagnosisFree forever · No credit card
Related codes
See related trouble codes
Create a free Wrenchify account to unlock the rest for U0404.
Unlock related codesFree forever · No credit card
Frequently asked questions
What does U0404 mean?
U0404 means "Invalid Data Received from Gear Shift Control Module". It is a generic OBD-II code that points to a fault in the network / communication.
What are the most common causes of U0404?
shift module internal fault; can corruption causing checksum errors; gateway module routing can messages incorrectly — these are the most commonly reported causes. Verify with a proper diagnosis before replacing parts, or use the Wrenchify app for a vehicle-specific diagnosis.
Can I keep driving with this code?
This code can put the vehicle into limp or reduced-power mode. Avoid extended driving and have the vehicle diagnosed promptly. Use the Wrenchify app for a full diagnosis specific to your vehicle.
Get the full U0404 diagnosis for your vehicle
Year, make, model + step-by-step repair help — free plan included.