U300E
Ignition Input On
Fault on the ignition ON input — module does not see ON state when other inputs say ON, or vice versa.
Fault on the ignition ON input — module does not see ON state when other inputs say ON, or vice versa.
Common causes
- high
Ignition switch contacts worn
One of the most commonly reported causes for this code — check this first.
Typical part cost: $40-440
- low
Gateway module routing CAN messages incorrectly
Less common, but worth ruling out after the more likely causes.
Typical part cost: $40-440
See all causes + fix costs
Create a free Wrenchify account to unlock the rest for U300E.
Unlock causesFree forever · No credit card
First things to check
- 1Confirm the code with a scan tool and check for additional related codes.
- 2Inspect the relevant sensors, wiring, and connectors for damage or corrosion.
Get the full step-by-step diagnosis
Create a free Wrenchify account to unlock the rest for U300E.
Unlock diagnosisFree forever · No credit card
Related codes
See related trouble codes
Create a free Wrenchify account to unlock the rest for U300E.
Unlock related codesFree forever · No credit card
Frequently asked questions
What does U300E mean?
U300E means "Ignition Input On". It is a generic OBD-II code that points to a fault in the network / communication.
What are the most common causes of U300E?
ignition switch contacts worn; gateway module routing can messages incorrectly; can terminating resistor (120 ω) drifted out of spec — these are the most commonly reported causes. Verify with a proper diagnosis before replacing parts, or use the Wrenchify app for a vehicle-specific diagnosis.
Can I keep driving with this code?
The vehicle is usually drivable for short distances, but the problem can worsen or affect emissions. Diagnose and repair as soon as practical. Use the Wrenchify app for a full diagnosis specific to your vehicle.
Get the full U300E diagnosis for your vehicle
Year, make, model + step-by-step repair help — free plan included.