P0CCE
Charge Port Door A Position Sensor Circuit Low
What it means
The charge port door A position sensor reports a low fault. Door state cannot be verified reliably. The on-board charger negotiates voltage, current and safety with the EVSE; a fault interrupts charging or limits it to AC slow-charge despite a DC fast charger being attached.
Is it safe to drive?
The vehicle is usually drivable for short distances, but the problem can worsen or affect emissions. Diagnose and repair as soon as practical.
Most likely causes
Signal wire shorted to ground
highOne of the most commonly reported causes for this code — check this first.
Internal sensor short
mediumA plausible cause — test and verify before replacing parts.
Connector pins corroded - high contact resistance
lowLess common, but worth ruling out after the more likely causes.
Related help
Get the full diagnosis
Add your vehicle and see step-by-step repair help, recalls, and TSBs in Wrenchify.
Diagnose P0CCE freeNo credit card required