P2324

What it means

The primary control circuit of ignition coil I reads a voltage below the expected level — usually a short to ground on the primary driver wire or a low-resistance fault in the coil primary winding. Coil I cannot build a normal charge, so the cylinder it fires misfires, especially under load. Causes: short to ground in the primary wiring, an internal coil primary fault, or a faulty ECU/igniter driver.

Is it safe to drive?

The vehicle is usually drivable for short distances, but the problem can worsen or affect emissions. Diagnose and repair as soon as practical.

Most likely causes

• Primary winding shorted to ground or harness chafed

  high

  One of the most commonly reported causes for this code — check this first.

• Coil I internal driver fault

  medium

  A plausible cause — test and verify before replacing parts.

• Connector pins corroded - high contact resistance

  low

  Less common, but worth ruling out after the more likely causes.

Related help

• Full P2324 diagnosis, causes & costs
• How to read check engine light codes
• Is it safe to drive with the light on?