Code result
P2630
O2 Sensor Pumping Current Trim Circuit Low Bank 2 Sensor 1
Moderate severity
What it means
The wide-band trim resistor circuit on bank 2 sensor 1 reads low. Air-fuel feedback gain on bank 2 is wrong, causing rich or lean offsets.
Is it safe to drive?
Use caution
The vehicle is usually drivable for short distances, but the problem can worsen or affect emissions. Diagnose and repair as soon as practical.
Most likely causes
Short in the calibration trim resistor
highOne of the most commonly reported causes for this code — check this first.
Water intrusion in the sensor connector
mediumA plausible cause — test and verify before replacing parts.
Connector pins corroded - high contact resistance
lowLess common, but worth ruling out after the more likely causes.
Related help
Get the full diagnosis
Add your vehicle and see step-by-step repair help, recalls, and TSBs in Wrenchify.
Diagnose P2630 freeNo credit card required