P26A7
Engine Coolant Bypass Valve A Position Sensor Circuit High
What it means
The bypass valve A position sensor signal is above the upper diagnostic threshold. Wiring faults of this kind typically come from chafing, water ingress at connector seals, or pin push-back — a wiggle test on the harness while the code is active often confirms the location.
Is it safe to drive?
The vehicle is usually drivable for short distances, but the problem can worsen or affect emissions. Diagnose and repair as soon as practical.
Most likely causes
Open sensor element
highOne of the most commonly reported causes for this code — check this first.
Signal wire shorted to the 5 V reference
mediumA plausible cause — test and verify before replacing parts.
Connector pins corroded - high contact resistance
lowLess common, but worth ruling out after the more likely causes.
Related help
Get the full diagnosis
Add your vehicle and see step-by-step repair help, recalls, and TSBs in Wrenchify.
Diagnose P26A7 freeNo credit card required