Code result
P26E8
Actuator Supply Voltage D Circuit Low
Moderate severity
What it means
The fourth actuator supply rail is below the expected voltage. Wiring faults of this kind typically come from chafing, water ingress at connector seals, or pin push-back — a wiggle test on the harness while the code is active often confirms the location.
Is it safe to drive?
Use caution
The vehicle is usually drivable for short distances, but the problem can worsen or affect emissions. Diagnose and repair as soon as practical.
Most likely causes
Load on the rail shorted to ground
highOne of the most commonly reported causes for this code — check this first.
Battery condition causes voltage to drop
mediumA plausible cause — test and verify before replacing parts.
Connector pins corroded - high contact resistance
lowLess common, but worth ruling out after the more likely causes.
Related help
Get the full diagnosis
Add your vehicle and see step-by-step repair help, recalls, and TSBs in Wrenchify.
Diagnose P26E8 freeNo credit card required