P2A0E
Manifold Absolute Pressure Sensor B Circuit Intermittent/Erratic
What it means
The MAP B signal drops out or jumps intermittently. Loose connector or noisy ground reference. Wiring faults of this kind typically come from chafing, water ingress at connector seals, or pin push-back — a wiggle test on the harness while the code is active often confirms the location.
Is it safe to drive?
The vehicle is usually drivable for short distances, but the problem can worsen or affect emissions. Diagnose and repair as soon as practical.
Most likely causes
Sensor connector not seated
highOne of the most commonly reported causes for this code — check this first.
Noisy ground reference
mediumA plausible cause — test and verify before replacing parts.
Connector with intermittent contact under vibration
lowLess common, but worth ruling out after the more likely causes.
Related help
Get the full diagnosis
Add your vehicle and see step-by-step repair help, recalls, and TSBs in Wrenchify.
Diagnose P2A0E freeNo credit card required